TCC01 – Thermo Couple Converter & DTM 3-way

With our TCC01 you can easily connect your exhaust gas temperature sensor:

Plug the Type-K probe into the converter on one side and on the other side you use the DTM connector for the power supply via 5V, ground and the signal for your control unit or data display.

Features of the TCC01

• reliable thermocouple amplifier
• Cold junction compensated Type-K input
• DTM06-3S connector
• Standard mini thermocouple connector
• Retaining strap for attachment with M6 screw or cable tie
• Linear temperature curve from 0-1000

Included:

• TCC01 in the housing
• DTM connector with locking tabs
• 3 pins to crimp yourself
• 3 pre-crimped connection cables

Support for a wide range of devices
Any device that has an analog input for 0-5V signals can be used as a receiver – e.g.:

• AEM
• Ecumaster
• Emtron
• DTAfast
• Holding technology
• LinkECU
• KMS van Kronenburg
• MaxxECU
• MBE
• Mega squirt
• Motec
• Syvecs
• VEMS

But the Type K converter can not only be used for exhaust gas temperatures. Also for liquids (1mm thermocouples) and gases (0.5mm thermocouples).