MFD32 Gen2

Key Features

• Perfect integration: The Universal housing fits at every place in the interior
• Can Bus: Readout of in-depth vehicle data such as manufacturer diagnostic tools
• Gear display: Directly via Can Bus or calculated from speed and rpm
• Touchscreen: Navigate through pages using intuitive swipe gestures
• Customization: Design your own pages, add your own pictures or start animation
• Additional inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display
• Can Switching: Use your display as a keypad and send your own can messages to the bus
• Customizable Alarms: Customizable alarms can be easily configured and activated. For example, get a big warning message when the exhaust gas temperature is above 900 degrees
• Logging: Log and save your data to the internal SD card for later analysis.
• Performance Meter: Measure your 0-100, 100-200 and 0-200 times with the integrated performance meter without any additional hardware.
• DTC: Read and clear the errors of engine control unit, transmission, ABS and all-wheel drive
• Dimming: Your display automatically dims along with the instrument panel

Different views

Configure your own page or choose from several predefined views:

• 10 freely configurable pages
  20 different widget types (e.g. sensor value, analog pointer, YT chart, RPM bar, circular display, vertical/horizontal bar)
  up to 64 widgets per page
  Widgets scalable in size and positionable via drag and drop
  colours of widgets fully adjustable

DSS – Display Setup Software

With CANchecked Display DSS (CANchecked Dsiplay.com/dss) you can fully customize your display. With the integrated log viewer you can download and view log files. Furthermore a Can-Logger is integrated. The heart is the integrated “TRI Editor” with which you can adjust the sensors (no matter if Can Bus or internal): Assign min-/max-values for warnings and change the names of your sensors.

Supported values

Many customers always ask: “Which values can I get from my ECU”. The answer: “ALL”.

We have reverse-engineered the data to most engines here and can offer in-depth data. Our display supports Can Bus data query (UDS, TP2, manufacturer specific protocols) as well as data query via K-Line (ISO 9141).

By default your display is delivered with predefined TRI/TRX files. In the files all sensors are defined, which are queried. These are different from engine to engine. Here is an extract of what is possible:

Temperatures:

• Exhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, gasoline temperature, DSG temperature.

Pressures:

• Boost pressure, ambient pressure, fuel pressure pre-feed pump, rail pressure actual/target.

Lambda/mixture

• Lambda value, injection time, short term lambda adjustment, long term lambda adjustment

Other

• RPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 timing in %, terminal 30 voltage, torque, gear, diesel specific values

If values are missing, they can be added later.

Scope of delivery

Included with every delivery

• MFD32 Gen2 data display
• Cable with pigtail and Connectors
• Quickstart Guide
• USB data cable
• SD card (pre-installed in the display)
• SD card adapter
• Display foil (to prevent reflections)
• two 1K resistors (to connect NTC sensors)

Connection and extension

Any sensors can be connected via the four analog inputs – we support linear 0-5V as well as NTC sensors.
Our in-house CANchecked Display sensors are stored in the TRI/TRX files by default and only need to be connected:

• AIN1: Temperature sensor
• AIN2: Transducer for exhaust gas temperature sensor type K
• AIN3: Pressure sensor 0-10 Bar
• AIN4: boost pressure sensor 0-5,5 Bar absolute

For the connection you can use our pre-assembled AIN wiring harness.

Beside the analog sensors you can also connect our external shift light with 8 LEDs. This can flash in different colours and the speed limits and colours can be configured directly on the display.

You connect the ethanol sensor directly to the display. You need a pullup resistor (10K) between 5V and signal. Then you can view and log the ethanol content and temperature directly on the display.

Advanced functions

With the Math-Channels you can calculate sensors with each other. The User-Table gives you the possibility to generate further sensors with 2D or 3D maps.

Optional accessories

• CC24000 SLM08 – external switching lightning module
• CC22100 CBD08 – eightfold Can Distribution Hub
• CC22902 NTC01 – temperature sensor for liquids 1/8″ NPT
• CC22903 TCC01 – type K converter 0-1250°C
• CC22901 FLP01 – Pressure sensor 0-10 Bar (145psi) M10x1
• CC22900 BST01 – Pressure sensor 0-5,5 Bar absolute (80psi)