RaceSense Tyre Gauge

The search for the best tyre gauge started after the rep of a competitors brand was doing the rounds at a Bathurst 1000. I resisted the weekend price special and began the search for something better… can confirm I found it! I personally have used the RaceSense Tye Gauge over the past 3 years, this gauge lives in my travel bag. These gauges have replaced the “other guys” in teams across the grid. GT3, GT4, Porsche, and Supercar teams are getting on board so take a look and consider moving to the racesense gauges too. Please reach out to us for any questions.

RaceSense Tyre Gauge

Consider manually transferring tyre data to excel, a task of the past. Each recording event, such as FP1 bleed down, is saved to the on-board memory which holds up to 64 recording slots. Once measurements are taken, data is available to display on the gauge or as CSV download via either USB to PC or NFC to the RaceSense app. The RaceSense Tyre Gauge is the only solution for professional and semi-professional race teams.

Special Features:

•Gauge mode for quick pressure check & bleed, no value logged

•Multi-tyre mode, check pressure, bleed to desired value, no button press. (CW or CCW) Start and end pressures are auto logged.

•Offset mode, pre-set desired pressure and target “0” when bleeding.

•7 programmable configs, quickly switch between 7 different cars, teams, drivers

•Recall all stored measurements on the gauge’s built-in screen

•Label tyre sets, hot vs cold and car number

Pressure:

•Bleed valve with 360 Swivel hose

•Built-in ambient pressure sensor

•Units of pressure: bar / psi / kPa / kg/cm2

•Maximum pressure: 6.89 bar / 100 psi

•Pressure accuracy better than +/- 0.01 bar or 0.1 psi over normal ambient temperatures and up to 60psi (over 60 psi accuracy typically better than 0.2 psi)

Temperature:

•Built-in ambient temperature sensor

•Temperature accuracy: 1 deg C

•Unit of temperature: Deg C / Deg F

•0 – 800 Deg C

•measure IN MID OUT or reverse for each tyre

•Auto TC Recognition, gauge will only request temps if probe is connected. Does not affect ambient temperature reading.

Mechanical:

•Rugged metal diecast case

•Water resistant

•2 physical buttons

•Brass swivel, chuck and fittings

•Polycarbonate front panel

•Stainless belt clip

•Weight: 300g

•Dimensions: 112.4 x 60.5 x 32 mm

Connections:

-K Type for thermocouple

-NFC

-USB type B (cable included)

Electrical:

•Internal clock for time and date

•OLED Screen – 3 brightness settings

•2 Screen resolution settings

•USB Rechargeable, 2 hours

•Continuous 24 hr battery life, or 3 months in standby.

•64 on-board memory slots, log up to 64 measurement events without needing the PC or app

•Firmware updates via USB for future improvements and features

Notes:

•App is available free for Android & IOS (NFC required for sync to Android & IOS device)

•No accounts required for app

•12 month guarantee

•PC software available for download online

Includes:

-RaceSense Gauge

-Protective carry case

-USB Type-B to Type-A

-User guide

•Temperature Probe (Optional)

•Protective rubber housing (Optional)